IPC 121195 Manual De Instrucciones página 24

CHECKING THE PRES-
SURE
The working pressure can be
read at all times. (Fig. 7).
TRANSPORTING
To move the machine, disconnect it from the mains electricity
and water supplies, release the parking brake on the side of
the machine and push it by the handle. (Fig. 8).
LIFTING WITH A CRANE
(Fig. 9)
To lift the high pressure
washer with a crane, hook
the high pressure washer to
the attachments on the top
part of the frame.
!
Danger
Danger of injury caused by
the appliance falling.
- Before lifting, make sure
the attachment system is not
damaged.
- Lift the appliance within the
operating range of the crane
only.
- Make sure the attachment
system is protected from mo-
vement of the load.
- Before lifting, remove the lan-
ce and high pressure hose.
- The appliance should be
moved by personnel expert in
use of a crane only.
- Do not stand under suspen-
ded loads.
- Make sure there is no-one
present in the range of action
of the crane.
- Do not leave the machine
unsupervised when attached
to the crane.
English
50 50
25 25
75 75
p s p s
0 0 1 1 0 0
b a b a
FIG. 7
FIG. 8
FIG. 9
- 21 -