Function & Settings
Icon
Function
Off switch
Oven light
Convection
Grill
Bottom heating
01
Switching on / off
1. Rotate the cooking mode knob (10) to a desired cooking mode.
2. Rotate the temperature knob (11) to a desired cooking temperature.
3. The oven now switches on and starts operation. The power indicator (13) and temperature
indicator (12) light up.
4. After cooking:
• Set the temperature knob (11) to
• Set the cooking mode knob (10) to
Note: The temperature indicator lights up from time to time during use. This indicates the oven is
maintaining the set temperature.
CAUTION! The appliance will not switch off automatically after use.
Never leave the appliance unattended during use.
GLOA10401 60L STATIC OVEN BLACK & WHITE v5d_R.indd 19
Description
Switches the oven off.
The oven light will illuminate in the oven cavity. All other cooking
modes are disabled. Note: The oven light also illuminates during all
operation modes.
The upper and bottom heating elements are both switched on. An
even temperature is produced on all shelves within the oven.
It is recommended that the oven is preheated for 10-15 minutes
before commencing cooking.
Only the top heating element switches on. Heat is distributed by
natural convection and this means that the top half of the oven is
warmer than the bottom half. Food should be placed on a higher
shelf if the food is to be crisped.
It is recommended that the oven is preheated for 10-15 minutes
before commencing cooking.
Only the bottom heating element switches on. This provides more
direct heat to the base of food without browning.
It is recommended that the oven is preheated for 10-15 minutes
before commencing cooking.
position.
position.
19
08/05/2017 16:58