6.
Use the heater as described in this manual. Any other use no recommended by the
manufacturer may damage the heater or cause burns, fire, electric shock, personal or
material damage.
7.
The heater must be installed in accordance with applicable electrical codes.
8.
Make sure the electrical installation is suitable for the electric heater.
9.
Do not let any foreign object obstruct the opening of the fan motor since this may
damage the heater or cause burns, fire, electric shock, personal or material damage.
10. Do not use the heater near areas where there is gasoline, paint, or any other
flammable object, substance or material.
11. Do not install the heater without a minimum space of 2 m.
12. Do not install the heater less than a height of less than 2 m. from the ground or carpet.
13. Service and cleaning should only be done while the heater is switched off power
supply circuit and the heater has cooled down to room temperature.
14. Heater must be well electrically grounded and polarized properly before use. Connect
only to an electrical outlet polarized.
15. Install, position and use this heater only in accordance with the instructions described
of this manual.
16. There is risk of short circuit when first connecting or repairing this heater, so a properly
trained and experienced technician should carry out these tasks. Don't try to do them
yourself.
17. Do not touch the heater if it is wet.
18. Do not cover or store any object or substance on the heater while it is on functioning.
19. Do not immerse any part of the heater in water or any other liquid.
20. Do not immerse heater cord or plug in water or any other liquid.
21. Keep cord and plug away from heater and hot surfaces.
22. Do not let the cord hang from the top of the heater when the heater is working.
10