Descargar Imprimir esta página

Mercalor MT01536 Manual De Instrucciones página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

FUNCTIONING
Operating Procedures: Rope Operated Switch.
Step 1:
Assemble the heater according to the assembly instructions.
Step Two: Connect This Heater Properly To The Electrical Supply System
correct according to the instructions.
Third step: Connect the power supply and operate the switch using rope.
CARE AND MAINTENANCE
UNPLUG THE HEATER AND MAKE SURE IT HAS COOLED UP TO REACHING
THE ROOM TEMPERATURE BEFORE PERFORMING TASKS FOR CLEANING OR
MAINTENANCE.
To keep the heater in good condition, do not use abrasive agents for cleaning (cleaning
powder, scourers, aluminum scourers or granular detergents). Spray water on a cloth or
sponge and then wipe.
Avoid running the heater at any time that any of its parts may not be completely dry to
avoid risk of burns, shock electrical, personal or material damage.
To get the best performance from your heater, it is recommended to do the following once
per year: with a properly regulated airflow from an air hose, release dust and dirt that has
accumulated on resistance and shiny surfaces. Store the heater in a sheltered, dry and
dust-free place and make sure that the shiny parts and electrical resistance are protected
from any damage.
14

Publicidad

loading