4- According to your needs, assemble beater, balloon whisk, kneading hook
into the rotating axis then turn them clockwise (as picture shows)
5- With one hand press the head down, then, with the other hand press the
tilt-head button, until you hear the "click" sound, set the head to the position
as shown. Turn on set appropriate speed.
6- When food is ready, press button "OFF" , unplug. with one hand press the
head down, then with the other hand press the tilt-head button, lift the head
up, until you hear the "click" sound. set the head to the position as shown in
picture.
7- Remove beater, balloon whisk, kneading hook anti-clockwise
8- Remove bowl cover anti -clockwise.
9- Remove bowl with prepared food anti-clockwise.
N.B. : The appliance will stop automatically according to below table
INSTRUCTION MANUAL