Sony Alpha 6100 Guía De Inicio página 5

1
Remove the body cap from the camera and the rear lens cap from the
rear of the lens.
2
Mount the lens by aligning the two white index marks (mounting
indexes) on the lens and camera.
3
While pushing the lens lightly toward the camera, turn the lens slowly
in the direction of the arrow until it clicks into the locked position.
Setting the language and the clock
1
Set the ON/OFF (Power) switch to "ON" to turn on the camera.
2
Select the desired language and then press the center of the control
wheel.
3
Make sure that [Enter] is selected on the screen and then press the
center button.
4
Select the desired geographic location and then press the center button.
5
Set [Daylight Savings], [Date/Time], and [Date Format], and then select
[Enter] and press the center button.
If you want to reconfigure the date/time or the area setting at a later
point, select MENU 
ON/OFF (Power) switch
Control wheel
Select items : //// /
Confirm : Center button
(Setup)  [Date/Time Setup] or [Area Setting].
GB
GB
5