Jackery Explorer 300 Plus Manual Del Usuario página 6

US
Fault code
In order to respond to the feedback quickly, we set up common fault codes F0-FE in the
system: If the F8 code appears, please remove the load or unplug the charging plug, the
product can restore by itself, if not, please contact after-sales service; If the F9 code appears,
please remove the load and the product can recover by itself, if not, please contact
after-sales service. In case of any other code appears, please contact our after-sales service.
High-temperature warning
If it appears on the screen, do not worry, the battery will restore automatically after cooling.
Low-temperature Warning
If it is displayed on the screen, do not worry. It will automatically restore after the ambient
temperature is restored.
BASIC OPERATIONS
Output On/O
Main power on/off: Press the "Main Power Button" and the working indicator lights up and the LCD
display is illuminated. When this product does not have any operation for 2 minutes, the product will
enter the hibernation state and the display will turn off automatically. If you need to turn off the main
power, please press and hold the "Main Power Button" until the working indicator turns off. The default
standby time of this product is 2 hours. If the other power output switch is not turned on, or the product
does not have any charging input, the product will automatically shut down after 2 hours. The
automatic shutdown time can be set on the Jackery App.
AC Output On/Off: Ensure that the main power supply is turned on. Press the AC Button, the AC
Output operation indicator lights up. Then you can connect the equipment that needs AC charging.
Press the AC Button again to turn off the AC Output.
USB/Car Port Output On/Off: Ensure that the main power supply is turned on. Press the DC Button, the
DC Output operation indicator lights up. Then USB/Car Port Output Ports can be connected to
external load devices. Press the DC Button again to turn off the USB/ Car Port Output.
LCD Screen On/O
To turn on, press the Main Power Button or when there's a charging input, the screen display will
light up automatically. To turn off, press the Main Power Button again and the screen display will
turn off. Or, if there is no operation in 2 minutes, the product will enter a sleep state and the screen
display will automatically turn off.
To get the screen always-on (under charging or discharging state), follow these steps: After the
display screen lights up, double-click the Main Power Button and the mode of Always-On Display will
be on.
To turn off Always-On Display, follow these steps: Press the Main Power Button and the screen will
be turned off in 2 minutes.
Tip: During Always-On mode, the screen automatically turns off after 2 hours without charging or
discharging.
AC Input Reset Button: When the Reset Button pops up, you need to remove AC charge cable and
press the Reset Button to reset.
04