Publicidad
STEP 8
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
WARNING
Please make sure that the Back Panel is attached securely.
All nails must be driven into the parts straight and centered.
Failure to do so could cause instability, product collapse,
and/or serious injury.
ameriwoodhome.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
6
(x20)
Fasten the back panel (G) to the unit with nails.
TMP4703
Attach the back panel so that the top edge covers the
edge of the shelf (E) and aligned side to side.
E
turn the unit onto its front
14
G
* raw edges are shaded
6
You
Tube
Publicidad
