Publicidad
Idiomas disponibles
Idiomas disponibles
d. The charger will charge the battery automatically.
e. When the charger indicates that the battery pack is fully charged,
remove the battery pack from the charger.
Please refer to the charger manual for detailed charging operation.
NOTICE: If the battery pack cannot accept a charge, the contacts of
the charger or battery pack may be contaminated. Clean the contacts
of the charger or battery pack (e. g. by inserting and removing the
battery several times or scrubbing with a cotton swab and alcohol),
replace a new charger or replace the battery pack, as required.
Charging via USB-C Port
WARNING
battery with certified USB-C
chargers . Failure to obey this
warning could cause battery damage
and serious personal injury.
NOTICE: The battery can be
charged via chargers supporting
USB-PD. Please note that other
charging protocols may be not
compatible with the battery.
a. Open the rubber USB-C port cover.
b. Use a suitable USB-C cable (included in select kits) and insert it
into the USB-C port (Fig. 3).
c. Connect the USB cable to a USB power adapter (included in
select kits). The USB indicator lights will flash for 3 seconds and
then go out to confirm that the power supply is connected.
d. The battery pack will start charging automatically. The USB
indicator lights will be fading in and out to signal the active
charging process.
e. When the battery is charged, disconnect the USB cable, and
close the USB-C port cover to protect the port from moisture and
contamination.
Always
charge the
Fig . 3
USB-C Port
USB-C Port
Cover
15
Publicidad
