Publicidad
Idiomas disponibles
Idiomas disponibles
Always wear safety goggles, hearing protection and if
necessary other protective means, such as working gloves,
coat, hard hat, etc.
WARNING: Read this manual carefully before using the
machine, for your own safety.
When using the machine, always observe the enclosed
safety instructions as well as the additional safety
instructions.
When mounting the machine, pay special attention to the
stability of the mounting facility. Make sure that the
mounting facility is suitable to carry the maximum winching
capacity of the machine.
Before use check if the cable winch has been wound on the
reel properly.
Bear in mind the maximum winching capacity. Avoid
overloading the machine.
The maximum winching capacity has been specified on the
outside of the machine.
Use the machine only for winching goods.
Never use the machine for winching persons.
Do not allow any person to walk under the winching point
during the operation.
Never allow any person to stand under a winched load.
Always check that the power supply corresponds to the
voltage on the rating plate.
Your electric cable winch has been designed for winching
domestic appliances and light construction materials.
1 On/off switch
2 Up/down switch
3 Operation unit
4 Load hook
5 End disc
6 Motor
The machine must be mounted to an anchored beam that
has sufficient load capacity and stability.
Mount the machine to the beam (8) using the braces (9),
bolts (10) and rings (11).
Firmly tighten the bolts. Instructions for use.
Publicidad
