Mobiclinic TEIDE Manual De Instrucciones página 26

ES EN FR IT
6. IT FUNCTION
A. BATTERY INSTALLATION
Insert two 1.5 V AA batteries (not included) into the battery box at the back (after each battery change, all
values will be "0").
B. FUNCTIONAL DESCRIPTION
1. Automatic scanning (SCAN): open the screen or press the button to enter the SCAN state, all functions
of the TIME-SPD-DIST-CAL-ODO-PUL will be automatically displayed on the main screen.
2. Time of movement (TIME): cumulative calculation of movement from 00:00-99:59, user can press the
button to select the display status of time value.
3. Displacement distance (DIST): cumulative calculation movement from 0.0-999.9, the user can press the
button to select the value of the distance display.
4. Calories (CAL): shows the accumulated calorie consumption from 0.0-9999.9 the user can press the
button to select the value of the display value status. Note: this data is only an approximate description
and cannot be used for medical treatment.
5. Speed of movement (SPEED): display the current speed of the athlete, value from 0.0-999.9 km/mile/
hour.
6. Odometer (ODO): the distance between movement and time is 0-9999km.
7. Pulse rate (PUL): instantaneous heart rate, 40-240 times/minute. Note: This data is only an approximate
description and cannot be used for medical treatment.
8. RESET: press and hold the button for about 3 seconds, all values will return to "0", the function can be
reset.
C. ATTENTION
1. If the electronic display is not set up properly, remove and reinsert both batteries making sure they are
in the correct orientation.
2. Battery specifications: 2 x 1.5 V AA batteries.
3. When the batteries are worn out, they must be removed from the electronic clock and disposed of
safely and correctly.
DE PT NL SWE PL DK
SPINNING BIKE TEIDE
26