Cricut Joyxtra JCTR201C Guía De Usuario página 6

Important safety instructions
PLEASE READ THIS ENTIRE DOCUMENT PRIOR TO
SETTING UP, OPERATING AND SERVICING YOUR
CRICUT SMART CUTTING MACHINE. PLEASE
®
FOLLOW THE ENCLOSED INSTRUCTIONS, ONLINE
INSTRUCTIONS AND OTHER OFFICIAL CRICUT
INSTRUCTIONAL MATERIALS.
In these instructions the term "Machine" means
Cricut Joy Xtra™.
WARNING: Risk of Injury, Fire and
Electric Shock.
Operating Machine in a manner not
prescribed in the enclosed instructions, online
instructions and other official Cricut materials
may result in damage to the Machine, property
damage, injury or even death.
Machine is intended to be operated by an
adult only. Not intended for use by children
12 years or under. Always supervise
children around Machine.
Only use Machine for its intended crafting purpose.
INDOOR USE ONLY. MACHINE IS INTENDED
FOR INDOOR USE IN DRY LOCATIONS ONLY.
DO NOT USE IN OR NEAR WATER. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQUID.
Machine is not intended for use by persons with
reduced physical, sensory or cognitive capabilities,
or lack of experience and knowledge, unless they are
supervised by a person responsible for their safety
and familiar with the safe operation of Machine.
Disconnect the electrical power by unplugging
Machine before servicing or cleaning.
Only clean Machine with a soft cloth dampened
with glass cleaner or water. Never use any kind
of flammable liquid to clean Machine. Do not use
6
solvents such as acetone or nail polish remover to
clean Machine as these will permanently damage
Machine's surfaces.
Always unplug Machine before replacing the blade.
Blades are extremely sharp and should be handled
with caution and extreme care. Prevent blade
contact with hands and body to avoid injury. Do not
allow children to handle blades. Blades and other
small parts are choking hazards and should be kept
and stored away from children.
Do not open, modify or otherwise tamper with Machine.
Do not operate if Machine or cord is damaged.
Contact Cricut Member Care for service: cricut.com/
contact or 1-877-727-4288.
Only use Cricut-approved power adapters. Never
pull on the cord to disconnect Machine from the
electrical socket; instead, grasp the plug and pull to
disconnect Machine.
The power cord should be positioned so that it
will not drape over the countertop or tabletop
where it can be tripped over, snagged or pulled on
unintentionally (especially by children).
Place Machine on a strong, flat, level and stable
surface. Make sure your workspace has enough
space in the front and back of Machine to allow the
machine mat to move through Machine freely.
Do not place your fingers or other objects in
Machine while connected to electrical power, while
Machine is powered on or during operations.
Keep hair, jewellery, loose clothing, fingers, other
body parts and any other items that could get
caught in the moving parts away from Machine
while it is operating as the rapid movements of the
carriage, mat and material during operation may
cause injury.