Descargar Imprimir esta página

Pfister Pasadena 8P8-WS1-PHH Manual Del Usuario página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

12
12A
CLOSED
12 VALVE FUNCTION
By rotating the Lever Handle (12A) slightly counterclockwise, the valve will
be fully activated to the "COLD" position. The water temperature can be in-
creased by continuing to rotate the Lever Handle (12A) in a counterclockwise
direction.
13
UP
For
Shower
13B
13A
13 TUB SPOUT FUNCTION
When the valve is turned on, water normally flows through the Tub Spout
(13A).To activate the shower, turn valve on and pull the Knob (13B) up. Hold
on until water flows continuously from the shower arm.
14 UNIT START UP
Turn on hot and cold water supplies, and check all connections for leaks.
15
15C
15B
15A
15 FINAL FLUSHING
For final flushing, turn valve on and allow water to run through the Tub Spout
(15A) for several minutes. Pull Spout Knob (15B) up to allow water to run
through Shower Hose (15C). Allow water to run for several minutes until all
foreign matter clears the line.
ENGLISH
FULL HOT
OPEN
FULL COLD
16
16 SHOWER HEAD INSTALLATION
Thread Hand Shower (16A) onto Hose (16B).
Make sure Hand Shower (16A) is securely tightened to Hose(16B).
17
17 HAND SHOWER FUNCTION
To adjust spray, turn outer shell (17A) using switch (17B) to a desired spray
pattern.
4
16A
16B
17A
17B

Publicidad

loading