Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Assembly Instructions:
Before assembly, make sure all parts are present. Compare parts with part-list below. If any part is missing or
damaged, do not attempt to assemble the product. Contact customer service for replacing parts.
1. Assemble Bottom plate(H), Base part(G) with 3 x bolts(T2). These also be used as foot pad, adjust them until the
base is level.
2. Assemble the middle body (F) to Base part (G) with 3 x bolts (T1).
3. Put the fire bowl (E) on top of middle body (F) and assemble them with 3 x bolts(T1).
4. Put Log grate(B) into the firebowl(E).
5. Insert the ash drawer (I).
You could make fire now.
6. Put BBQ plancha (C) on the bracket of the firebowl. Use BBQ grate (A) if you need.
Now assembly is completed
Use Raincover (W) to protect your grill if not in use.
Set up on a flat surface, away from anything that could pose a fire threat. As this item is low to the ground, always
keep an eye on the fire.
A
BBQ grate
B
Grill support
C
BBQ plancha
D
Log grate
E
Fire bowl
F
Middle body
G
Base
H
Bottom plate
I
Ash drawer
J
Raincoat
1
1
1
1
1
1
1
1
1
1
T1
Bolt (M6 x 15mm)
T2
Feet pad
X
Allen Wrench
Z
Poker
3
6
1
1
Publicidad
