Publicidad
Idiomas disponibles
Idiomas disponibles
Wear protective footwear.
CAUTION! Risk of electric shock!
CAUTION! Danger of fire - flammable material!
Safety class II equipment with double insulation.
Caution! Hot surface can cause burns!
CAUTION! The figures in this manual are illustrative only and may vary in some details from
the actual appearance of the product.
2. Safety of use
CAUTION!
Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in electric shock, fire, and/or serious injury or death.
The term "device" or "product" in the warnings and the description of the instructions refers to
Electric engraver
2.1.
Electrical safety
a)
The plug of this device must fit into the outlet. Do not modify the plug in any way. Original plugs and
matching outlets reduce the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Do not use the cord in an unintended manner. Never use it to carry the device or to pull the plug out of
the socket. Keep the cord away from heat sources, oil, sharp edges, or moving parts. Damaged or tangled
cords increase the risk of electric shock.
d)
Do not use the unit if the power cord is damaged or shows signs of wear. A damaged power cord should
be replaced by a qualified electrician or the manufacturer's service department.
e)
To avoid electric shock, do not immerse the cable, plug, or the device itself in water or other liquid. Do
not use the appliance on wet surfaces.
f)
CAUTION – DANGER TO LIFE! When cleaning or using the appliance, never immerse it in water or other
liquids.
g)
Do not use the appliance in rooms with very high humidity / in the immediate vicinity of water tanks!
h)
Do not allow the machine to get wet. Risk of electric shock!
2.2.
Safety in the workplace
a)
Keep the work area tidy and well-lit. Disorder or poor lighting can lead to accidents. Be foresighted,
watch what you are doing, and use common sense when using the unit.
b)
Do not use the unit in an explosive area, for example in the presence of flammable liquids, gases or dust.
The unit produces sparks that can ignite dust or fumes.
c)
If you find any damage or irregularities in the operation of the unit, immediately turn it off and report it
to an authorized person.
d)
If in doubt as to whether the product is working properly or found to be damaged, contact the
manufacturer's technical service.
e)
Only the manufacturer's service department may repair the appliance. Do not carry out repairs yourself!
f)
If you have any doubts as to whether the product is working properly or if it is damaged, contact the
manufacturer's service department.
EN
Publicidad
