Publicidad
Idiomas disponibles
Idiomas disponibles
Mark the positions of wiring holes and screw holes.
1. Place the installation fittings in the predetermined installation position of the bathroom wall.
※. Please pay attention to the size difference between the mounting bracket and the TV
main body.
The main body of the TV set is better than the mounting accessories,40mm on the left
and right.
※. Please make sure that the wall at the scheduled installation location is flat.
2. Draw a reticle on the bathroom wall according to the lines engraved on the mounting bracket.
3. Mark the mounting hole position 7 of the mounting bracket.
Mark the position
of the mounting
screw hole.
Draw a crosshair according to the reference line.
When sticking to the mounting bracket, please pay attention to whether it
is horizontal.
Drill wiring holes in the bathroom wall
With the intersection point of the reticle drawn on the bathroom wall in step1 as the center,
punch Φ30 mm〜Φ60 mm.
6
Mark the position
of the mounting
screw hole.
Wiring hole Φ30〜60mm
Installing support
Make a bottom hole at the place where the screw is driven.
Please use screws or fixers in the installation of metal parts according to the material,
thickness and state of the installed bathroom wall.
Punch holes in the marked positions in step 1.
When using the attached screws, please make a pre-drilled hole based on φ Φ3.0mm.
Make a bottom hole at the place where the screw is driven.
Drive the current threaded sleeve into the hole and fix it with the screw mounting bracket.
Please be careful not to
let the screws damage
the pipes in the wall.
7
Publicidad
