Publicidad
System certified by WQA against NSF/ANSI Standards 42 for the reduction of the claims
specified on the Performance Data Sheet, and to NSF/ANSI 372 (≤0.25% lead).
Parts List
Inlet hose
Teflon tape
Specifications
Operating temperature
2-38°C/35-100°F
Working pressure
10-100 psi (0.7-6.8 bar)
Flow rate
0.75 gpm (2.83 lpm)
WD-RF10/WD-RF10-UF/MZ/AK: up to 11,000 gallons
WD-RF15/WD-RF15-UF/MZ/AK: up to 19,000 gallons
Filter capacity
WD-RF17/WD-RF17-UF/MZ/AK: up to 24,000 gallons
Feed water requirement
Municipal tap water
Note:
1. If using well water as the source, please make sure the feed water has been through a pre-filtration system,
otherwise, large particles in well water will clog the filter easily and shorten filter life.
2. The above form lists model numbers of only black filters. Please note that the white filter is different from the
black filter only in color. They have the same filter material and filtration capacity.
3. Actual filter life varies according to local water quality.
Precautions
• Do not use it with water that's microbiologically unsafe or of unknown quality without adequate disinfection.
• For use only with cold water.
• Do not freeze the filter, as this can cause cracking and water leakage.
• Do not allow children under 3 years old to have access to small parts during installation of this product.
• This installation must comply with all applicable state and local regulations.
• Turn off the water supply while replacing the filter.
Filter head
Outlet hose
3/8"-1/2" converter
Publicidad
