Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL DESCRIPTIONS
1
2
3
4
5
6
1. Locking Cover
2. Work Light
3. Switch Trigger
4. Torque Setting Panel
5. Battery Indicator Light
6. Battery
7. Reversing Switch Lever
INSTRUCTIONS For
OPERATION
Installing or Removing Battery
CAUTION:
● Only use designated battery. Using other
manufacturer's battery may cause injury and loss of
property because of explosion.
● Do not remove the battery forcibly.
● Please set the reversing switch lever to the
center position, avoid triggering switch to cause
danger when installing and removing battery.
To install the battery firmly, insert it properly all
the way until it locks in place with a little click.
If not, it may accidentally fall out of the tool,
causing injury to you or someone around you.
Avoid overexerting or hammering the battery into
the motor housing with the help of other
objects.
1
2
EN
10
To remove the battery, press the unlocking buttons
on both sides of the battery and pull out the battery
according to the direction of arrow.
7
Power Indicator Light
When the power button or the startup tool is
pressed, the power indicator will display the battery
pack's power, which can be indicated by the status
of four red LED lights (hereinafter referred to as red
lights).
Switch Action
CAUTION:
● Before inserting the battery into the tool, always
check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
● Never operating in a low rotation speed for long
time,otherwise it will cause overheat inside the
machine.To start the tool, simply pull the switch
trigger and keep it pressed. Tool speed can be
variably adjusted depending on how far the switch
trigger is pressed.Release the switch trigger to
switch off the tool.
1. Battery pack
button
2.Battery pack
Reversing Switch Action
●Always check the direction of rotation before
1
1
1
:
CAUTION
2
1.Power Indicator
Light
1.Switch Trigger
Publicidad
