Create SILKAIR HOME Manual Del Usuario página 12

CONTINUOUS DRAINAGE (OPTIONAL, ONLY APPLICABLE TO DEHUMIDIFYING MODE)
• Unscrew the drainage cover, and unplug the
water plug.
• Set the drainage pipe into the water outlet.
• Connect the drainage pipe to the bucket.
Before performing tasks of cleaning and maintenance, turn
off the machine and unplug it.
1. Clean the surface:
• Clean the surface of the machine with a wet soft cloth.
Don't use chemicals, such as benzene, alcohol, gasoline,
etc; otherwise, the surface of the air conditioner will be
damaged or even the whole machine will be damaged.
2. Clean the filter screen:
• If the filter screen is clogged with dust, and the effective-
ness of the air conditioner is reduced, be sure to clean the
filter screen once every two weeks.
3. Clean the upper filter screen frame:
• Unscrew one screw fixed by EVA filter net and back shell
with screwdriver, and take out EVA filter net.
• Put the EVA filter screen into warm water with neutral
detergent (about 40/104 0C) and dry it in the shade after
rinsing clean.
• Unscrew the drainage cover, unplug the water plug, and discharge the water in the water
tank into other water containers or directly tilt the body to discharge the water into other
containers.
• Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until
the drainage pipe becomes
• dry, so as to keep the inside of the body in a dry state and prevent it from mildewing.
• Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping
post; install the water plug and the drainage cover.
• Remove the exhaust pipe and keep it properly.
• Cover the air conditioner with a plastic bag. Put it in a dry place, keep it out of the reach of
children, and take dust control measures.
• Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine components
properly.
12 E NGL I SH
*Drainage pipe not included.
MAINTENANCE
STORAGE