When the appliance is powered on for the first time, you will hear a short power-on music.
Then the device will get into standby status.
• Power key: To turn on and off the device.
• Up / Down keys: To change temperature and time settings. (Temperature can't be set while
in dehumidifiying mode.)
• High /Low fan speed keys: To set the strongest or lowest air flow automatically.
• Sleep mode: The unit will work on energy-saving and quiet mode.
• Air flow speed selection: In cooling and fan mode you can select high or low air flow. But it
may not work as set under certain conditions, as anti-cold conditions.
• Dehumidifier: Pressing any key is invalid in this mode and the fan will work on low air flow
speed.
• Cooling key: To start cooling the room.
• Water full light: The device will stop working when the water tank is full and needs to be
drained away.
• Timer: Press this key and when the timing light flashes press up or down keys to select the
required time, from 1 to 24 hours.
1. Screen
2. Power
3. Timer
4. Sleep mode
5. Up / Down
6. Modes
7. Fan speeds
8. Temperature unit
FROST PRO TECT IO N F UNCT I O N
In cooling, dehumidifying or economic power-saving mode, if the temperature of the exhaust
pipe is too low, the air conditioner will automatically enter protection status; if the tempera-
ture of the exhaust pipe rises to a certain temperature, it can automatically revert to normal
operation.
OV E RFLOW PRO T ECTI O N F U NCT I O N
When water in the water tank exceeds the warning level, the machine will automatically
sound an alarm, and the full indicator light will flash. At this point, you need to move the
drainage pipe connecting the device or the water outlet to a sewer or other drainage area
to empty the water. After the water is emptied, the device will automatically return to the
original state.
AUTOMATIC DE F ROST I NG
The machine has automatic defrosting function. Defrosting can be achieved through a four-
way valve reversing system.
REMOTE CONTROL
PROTECTION FUNCTIONS
1
2
3
4
ºC
ºF
5
6
7
8
E NGLI SH
9