Publicidad
Idiomas disponibles
Idiomas disponibles
MILK-BASED BEVERAGE
PREPARING A GALÃO - LATTE/ CAPPUCCINO
Rinse the milk tank thoroughly before reusing it.
Rinse the milk tank thoroughly before reusing it.
Pour milk into the milk tank according to the desired amount.
To obtain a perfect milk foam use semi-skimmed milk at the
To obtain a perfect milk foam use semi-skimmed milk at the
refrigerator temperature.
refrigerator temperature.
Cover the milk tank with the lid.
Open the milk system door.
Connect the milk tank to the milk system.
Raise the lever to its full extent and insert a Delta Q coffee capsule in
the capsule housing hole, in accordance with the housing silhouette.
Completely lower the lever.
Adjust the cup tray. And place a glass of Galão - Latte (black coffee
and 3/4 milk) or a Cappuccino cup (with capacity exceeding 190cc)
under the extraction nozzle.
Adjust the selector to the Galão - Latte or Cappuccino position
according to the desired beverage. Selector's side light is green.
Press button D. It will start to flash with a green light during extraction.
The lights on buttons A, B and C will go out.
After extraction, the machine will return to Ready to Use Mode.
The standard extraction volume: approx. 190cc.
A
For Galão - Latte, the beverage preparation starts as follows
For Galão - Latte, the beverage preparation starts as follows
(first the coffee, and then the milk).
(first the coffee, and then the milk).
For Cappuccino, the beverage preparation starts as follows
For Cappuccino, the beverage preparation starts as follows
(first the milk foam and then the coffee).
(first the milk foam and then the coffee).
The preparation of drinks can be interrupted or stopped by pressing
any of the extraction buttons.
You are recommended to lift the lever again at the end of the
extraction process to release the capsule into the used capsule tank.
Lower the lever into its resting position.
If making Galão - Latte or Cappuccino continuously, the machine
If making Galão - Latte or Cappuccino continuously, the machine
needs to preheat (Button D blinks green and buttons A, B and C
needs to preheat (Button D blinks green and buttons A, B and C
stay in green. Selector's side light is green). When it reaches the
stay in green. Selector's side light is green). When it reaches the
right temperature, it continues to extract.
right temperature, it continues to extract.
In order for the milk system to operate perfectly, it must be rinsed
In order for the milk system to operate perfectly, it must be rinsed
and cleaned after each use.
and cleaned after each use.
— 10 —
EN
LEVEL 2
Capacity for 2 glasses
LEVEL 1
Capacity for 1 glass
A
B
C
A
B
C
Publicidad
