Delta MINI MILKQOOL Manual De Instrucciones página 14

RESET FACTORY SETTINGS/ PURGING/
CLEANING AND MAINTENANCE
RESET FACTORY SETTINGS
When in Ready to Use Mode, press button A and C at the
same time for more than 3 seconds.
All of the buttons will flash 3 times.
The machine will return to the factory settings.
After flashing 3 times, the machine will automatically
return to Ready to Use Mode.
PURGING
Purging the system frequently ensures the quality of the
extracted drinks and the correct maintenance of the device.
Place a cup under the nozzle and press the espresso button
to rinse the machine without inserting a capsule. The
extraction will stop automatically. When the LED light stops
flashing, the machine is Ready to Use.
CLEANING AND MAINTENANCE
Ensure the device is unplugged before cleaning.
To avoid electric shock, do not immerse the lead, plug or device in water or any other
liquid. Do not use abrasive or solvent-based cleaning agents.
Cleaning the drip tray, used capsule container and water tank.
Remove and empty the drip tray, used capsule
container and water tank.
The drip tray, used capsule container and water tank
can be washed in water and dried with a soft cloth.
Clean the outer surfaces of the machine with a
damp cloth.
Never immerse the machine in water or any other
liquid.
Empty the used capsule container regularly to prevent damage to the machine and poor
functioning.
— 13 —
EN
A B C
A B C
A