Keep For Future Reference - JANE Glow Instrucciones De Uso

Proyector musical de estrellas con sensor lloro
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
READ THE INSTRUCTION MANUAL CAREFULLY AND

KEEP FOR FUTURE REFERENCE

This product is designed to stimulate the child's senses, it is not for the child to pick up and play with
1- DESCRIPTION OF YOUR NEW GLOW PROJECTOR
EN
The new Glow projector with lights and lullabies has been designed to stimulate your child's senses
(auditory-visual) and promote cognitive development, while improving his sleep habits.
• This projector includes "silent technology" which means you can't hear any cog movement from the
rotating element of the product.
• The accessory device with handle is fitted with clip so the projector can be attached to mini cots, co-
sleeping cots, playpens, flexible travel cots or bassinets. It can also be used on tables and different types
of flat surfaces. This means it can be used to entertain or relax your child when he no longer uses a cot or
whenever he wants so he can continue to enjoy the star projector. This gives the product a much longer
useful life. (See page 3 with the details of both uses).
• The quick and easy attachment system of this projector means it can be fastened quickly by simply
clipping it onto the side rail of the mini cot, co-sleeping cot... etc, with a single click.
• Unlike other projectors on the market, this projector includes technology that provides a calming and
fascinating galaxy of colourful stars which, with or without movement, will project more than 150 stars
onto the ceiling creating a soothing, harmonious atmosphere that will delight your baby.
•The different melodies will keep the child entertained, there are three melodies to choose from and
also the sound of sea waves for total relaxation. The crying sensor of the projector helps parents during
the night, as the night light will come on providing just the right amount of light to calm the child or dis-
tract him until his parents come into the room. The soft light will also help your child get back to sleep.
• With "intelligent auto-off". This product is programmed to switch off automatically after 30 minutes,
according to the selected option.
2- ASSEMBLY INSTRUCTIONS
IMPORTANT
Remember that the product must be fitted by an adult.
WARNING
Please follow these instructions to avoid damaging the product or injuring the user.
(Consult pages 2 and 3 while following these instructions):
OPTION 1- Attaching to mini cots, co-sleeping cots, playpens or bassinets.
Hold the projector in one hand and hold the attachment clip in your other hand. The clip has two "con-
nector pins" on the top part. You will see that your projector also has two holes of the same size in the
base. Connect the clip to the holes and turn it until you hear it click into place. Increase the width of
the clip by turning the knob until reaching the required position and attach it to the side of your mini
WARNING
8
cot / co-sleeping cot, etc. Then close the opening of the clip, by turning the adjustment knob the other
way until the projector is securely attached. Make sure that the projector is fixed in place and does not
wobble.
In the pack you will also find a screwdriver so you can make sure the two parts (projector and clip) are
securely fastened together for extra safety when using the version attached to mini cots (See diagram
on page 2).
Safety Note: This screwdriver is provided as an optional extra for additional safety to prevent the child from
removing the projector with his hands. Attaching the projector without using the screwdriver is complete safe
and has passed the safety tests of Standard EN-71.
OPTION 2- If you want to use the projector on a table top or on the floor in the baby's room, do not
connect the clip accessory to the projector. Or detach it if it is connected. Turn the clip and remove.
3- PROJECTOR FUNCTIONING INSTRUCTIONS
CONTROL PANEL OR MENU
MICROPHONE
Yellow button on the left. Projector function
• Press once: projection of static coloured stars
• Press twice: projection of coloured stars with gentle movement.
• Press three times: night light + projection of coloured stars with gentle movement.
• Press four times: the star projector switches off and just the night light comes on.
• Keep pressed for a few seconds: all lights will switch off
After 30 minutes the lights will automatically switch off with the automatic timer in all of the function options.
Sound button. Volume function
The default volume setting for the projector is low.
• Press once: medium volume
• Press twice: high volume
• Press three times: low volume
Lullaby selector button
• Press once: "Swan Lake" part one
• Press twice: "Swan Lake" part two
• Press three times: "Twinkle Twinkle little Star"
• Press four times: "Natural sound of the waves"
• Keep pressed for a few seconds: music will switch off
After 30 minutes the lullaby will switch off automatically with the automatic timer in all of the function options.
To activate the functions of the projector
and select the required option for each
occasion, follow the functioning instruc-
tions below:
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

30604

Tabla de contenido