Information About The Batteries; Safety Warnings; After-Sales Service - JANE Glow Instrucciones De Uso

Proyector musical de estrellas con sensor lloro
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
Green button on the right (CRYING SENSOR)
Press the button on the right until the button turns green and permanent. This means that the "crying sen-
sor" is activated. To deactivate the sensor, press the button again until it changes from green back to its usual
neutral colour.
How does the crying sensor work?? In normal conditions of use the night light of the projector will switch off
after 30 minutes. If the crying sensor is activated, the night light will switch on within 30 seconds of detecting
the baby crying and will stay on for 30 minutes, and it will switch on again if the baby cries again. This option
can be deactivated manually or automatically once eight hours have passed since it was activated.

4- INFORMATION ABOUT THE BATTERIES

This projector works with batteries 3 x AA (not included with the product)
1. BATTERIES: 3 x AA/LR6 (1.5V) batteries
1.1. Inserting the batteries: With a Phillips-head screwdriver that is the right size for the screws, loosen the
screw on the battery compartment found on the base of the projector and insert the three batteries making
sure they are the right way round (+/-), see Page 3. After fitting the batteries, put the cover back on and
tighten the safety fastening screw firmly. The batteries are not included with the product.
1.2. IMPORTANT! To prolong the useful life of the batteries, switch the projector off when not in use.
1.3. WARNINGS! The batteries should be changed by an adult. Dispose of the batteries safely. Only use the
type of batteries recommended. Do not mix different types of batteries and do not mix new batteries with
old ones. The batteries must be inserted the right way round.
Worn out batteries should be removed from the product. The power terminals must not short circuit. Do not
burn the batteries. The power sockets must not be exposed to short circuits.
2. This product can also use rechargeable batteries.
2.1. WARNINGS! Non-rechargeable batteries must not be recharged.
Rechargeable batteries must be taken out of the product before being recharged.
Rechargeable batteries should only be recharged under the supervision of an adult.
Do not mix alkaline or normal batteries (carbon-zinc) with rechargeable batteries (nickel-cadmium).
5- CLEANING AND MAINTENANCE OF THE PROJECTOR
Do not clean this product or any of the parts with water.
Use a damp cloth to wipe it clean.
Do not immerse in water.
10

6- SAFETY WARNINGS

SAFETY WARNINGS
•Do not expose this product or any of the parts to sunlight, damp, hot or dusty conditions.
•Do not expose this product or any of its parts to fire, naked flames or source of heat.
•This product should be unpacked and assembled by an adult.
•This product has been designed only for indoor use.
•Keep the product and all the parts away from sources of water.
•Always attach all the fastening devices of the projector securely to the mini cot, playpen or bassinet follow-
ing these instructions. Check them regularly. Do not add extra cords or straps to attach the projector to the
cot or co-sleeping cot.
•This product is designed for the baby's visual and auditory stimulation, it is not designed for the child to
grab hold of it.
•The star projector and the night light should be used in a completely dark room to ensure maximum glow
while the product is in use.
For your child's safety:
-Regularly check the condition of any toy for your child's safety.
-When opening the packaging: Keep the packaging materials and inner clips out of the reach of children as
they are not a toy.
-For your baby's safety take all the parts out of the box and remove all the packaging.

7- AFTER-SALES SERVICE

This product should only be repaired by our technical service or authorised workshops.
How to dispose of used electrical and electronic devices
1. If the product displays the symbol of the crossed out rubbish bin, this means it is included in Directive
2002/96/EC.
2. All electrical and electronic devices should be selectively recycled. They should be disposed of at specific
collection points designated by the local authorities that are different to the normal waste removal service.
3. For more information on how to dispose of electrical and electronic devices you can contact your council,
the waste removal service or the establishment where you go to buy a new device.
The image on this product depicting a crossed out wheelie bin means that the product must not be disposed
of with normal household waste. To avoid possible damage to the environment, or to people, separate this
product from other waste to ensure that it is recycled safely from an environmental point of view. For more
details about the existing collection points please contact your local authority or the retailer from whom you
bought the product.
This product complies with the EN 71 international toy safety standard.
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

30604

Tabla de contenido