Function
1
On / Off
2
First speed
3
Second speed
4
Third speed
5
Maximum speed
Filter notification
6
7
Lamp
5. DAILY USE
5.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or
burners.
While boiling and frying big quantities of food without a lid, big humidity. After 8 minutes the appli‐
ance returns to previous setting.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
The control Panel is a sensor field. To
operate the hood touch the symbol
exactly in the middle for at least 1
second.
To operate the hood:
1. Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2. To activate the function touch the symbol.
Description
Turns the hood on and off.
The motor switches to first speed level.
The motor switches to second speed level.
The motor switches to third speed level.
The motor switches to maximum speed.
Reminds to change or clean the charcoal filter and clean the grease
filter.
Turns the lights on and off.
The hoods light works independently to
other hood functions. To illuminate the
cooking surface touch
To turn off the appliance press the
again.
5.2 Hob²Hood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
57
.
symbol