Basic Safety Rules - Husqvarna 125E Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY
INSTRUCTIONS
Basic safety rules
/ Q00
1. Observe
your surroundings:
• To ensure that peopte, animals
or other
things cannot affect your control of the
machine.
• To ensure that people,
animals,
etc., do
not come
into contact with the blade or
loose objects that are thrown out by the
blade.
CAUTIONt
Do not use the machine un-
less you are able to call for help in the
event of an accident.
2. Do not use the machine in bad weather,
such as dense fog, heavy rain, strong
wind, intense cold,
etc. Working in bad
weather
is tiring and often brings added
risks, such as icy ground, unpredictable
felling direction, etc.
3. Make sure you can move and stand safely.
Check the area around you for possible ob-
stacles (roots. rocks, branches, ditches,
etc.) in case you have to move suddenly.
Take great care when working
on sloping
ground.
4. Switch off the engine before moving to
another area.
5. Never put the machine down with the en-
gine running.
Basic working techniques
Safety instructions while working
• Always
ensure you have a safe and firm
foothold.
• Always
hold the machine
with both hands.
Hold the machine
on the right-hand
side
your the body.
• Make sure your hands and feet do not
come into contact with the blade when the
engine is running.
• When the engine is switched
off, keep your
hands and feet away from the blade until it
has stopped.
• Always
cut edges at fuli throttle.
• Always
keep the blade close to the
ground.
• Always
drop to idling speed after each
working
operation.
Longer periods
run-
ning at full throttle without loading the en-
gine (that is without
resistance,
which the
engine feels from the blade when edging)
can lead to serious engine damage.
• It is recommended
that the engine not
be operated
for longer
than 1 minute
at
full throttle.
• Be especially
careful when pulling the
edger towards you during work.
• Walk, never run.
• if heavy vibrations
occur, stop the engine.
Remove
the spark plug cable from the
spark plug. Check that the machine
is not
damaged.
Repair any damage.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido