Technical Data - Husqvarna 125E Manual De Instrucciones

TECHNICAL DATA
Technical data
125E
Engine
Cylinder volume, cu.in./cm 3 1.7/28
Cylinder bore, inch/mm 1.4/35
Stroke, inch/mm 1 .t30/28.7
Idle speed, rpm 2,800-3,200
Recommended max. speed, rpm 11,000
Speed of output shaft, rpm 8,000
Max. engine output, acc. to ISO 8893, hp/kW 1.1/0.8
Catalytic converter muffler Yes
Speed-regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor Zama
Fuel tank capacity, US pint/liter 0.85/0.4
Weight
Weight without fuel, cutting attachment and guard, Ibs/kg 13.3/6.0
Sound levels
Sound power level, LWA dB(A) 114
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-1997, dB(A),
min/max (see note 1) 94/97
Vibration levels
Vibration levels at handles, measured according to ANSi
B 175.3-1997, m/s 2
At idle, left/right handles 3/5
At max. speed, left/right handles 9/8
Walbro/CD
Champion RCJ-6Y
0.024/0.6
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for
noise pressure levels under various working conditions with the following time distribution:
1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all
the machine's approved cutting equipment fitted. The table indicates the highest and lowest
values.
Model 125E (M10 LH arbor shaft thread)
Cutting equipment Part. no.
Blade 530053007
Blade guard kit 545044101
2O