Alsafix D 38/100 P1 Manual De Operaciones página 11

20. Never actuate the tool into free space.
This will avoid any hazard caused by free flying fasteners and excessive strain of the tool.
21. Always assume that the tool contains fasteners.
22. Respect the tool as a working implment.
23. No horseplay.
24. Never load the tool with fasteners .
OBSERVE THE FOLLOWING GENERAL CAUTION IN ADDITION TO THE OTHER WARNINGS
CONTAINED IN THIS MANUAL
Do not use the tool as a hammer
Always carry the tool by handle, never carry the tool by the air hose
The tool must be used only for the purpose it wase designed
Never remove, tamper with the operating controls (e.g., trigger, contact arm)
Keep the tool in a dry place out of reach of children when not in use
Do not use the tool without Safety Warning label
Do not modify the tool from original design or function
Supplement to the operating instruction
According to the European Norm EN 792-13 the regula-
tion is valid from 01.01.2001 that all fastener driving tolls
with contact actuation must be marked with the symbol
"Do not use on scaffoldings, ladders" and they shall not
be used for specific application for example :
- when changing one driving location to another invol-
ves the use of scaffoldings, stairs, ladders or ladder
alike constructions e.g. roof laths
- closing boxes or crates
- fitting transportation safety systems e.g. on vehicles
and wagons
11