Publicidad
Idiomas disponibles
Idiomas disponibles
Question/Problem - Cause
Causa
The power tool does not switch on:
• The power cord is disconnected or damaged;
• The ON/OFF switch is set to "OFF" position;
• The trigger electrical contacts are not in good
condition or trigger does not function;
The
motor
makes
intermittently or runs slowly:
• The trigger electrical contacts are damaged;
• Mechanical parts are blocked/clogged;
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by its use.
an
abnormal
sound,
Solution
• Plug in or repair the power cord;
• Set the ON/OFF switch to "ON" position;
• Repair or replace the trigger;
starts
• Repair or replace the trigger;
• Inspect the mechanical parts;
We declare, under our sole responsibility, that the product
labelled 575W NAIL/STAPLE GUN with code VIAP575
complies with the following standards or normative
documents: EN 60745-1:2009/A11:2010, EN 60745-2-
16:2010, AfPS GS 2019:01 PAK, EN 55014-1:2017/A11:2020,
EN 55014-2:2015, EN IEC 61000-3-2:2019, EN 61000-3-
3:2013/A1:2019, IEC 62321-3-1 Edition 1.0:2013, IEC 62321-
5 Edition1.0:2013, IEC 62321-4 Edition 1.0:2013+A1:2017,
IEC 62321-7-2 Edition 1.0:2017, IEC 62321-7-1 Edition
1.0:2015, IEC 62321-6 edition 1.0:2015, IEC 62321-8:2017,
as defined by:
2006/42/EC - The Machinery Directive
2014/30/EU - The Electromagnetic Compatibility Directive
2011/65/EU & (EU) 2015/863 – RoHS Directive
S. João de Ver,
nd
22
november 2022
Central Lobão S. A.
Technical manager
Hugo Santos
Publicidad
