Publicidad
Idiomas disponibles
Idiomas disponibles
If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is selected, a
pass code input screen appears. Enter the pass code to receive the channel.
•
To store a channel of the current band: Press and hold one of the number
buttons (1 to 6).
•
To select a stored channel of the current band: Press one of the number
buttons (1 to 6)
Direct Access Tuning (using RC-406)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a channel number, then press
4 / ¢ (+) to start searching.
• To cancel, press
or DIRECT.
Replay
Press
(or
on RC-406).
Replay starts from the live position (and "
During Replay...
• To pause or resume playback, press 6 38 (or ENT 38 on RC-406).
• To skip the current song backward/forward, press 4 / ¢ (or 4 / ¢ (+)
on RC-406).
• To rewind/fast-forward, press and hold 4 / ¢ (or 4 / ¢ (+) on RC-406).
• To exit from Replay and go to live, press
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SETTINGS], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press
the knob.
4
Press and hold
to exit.
Selects the tuning method for the 4 / ¢ buttons.
SEEK MODE
CHANNEL: Manually search for a channel. ; PRESET: Search for a preset channel of
the selected band.
KDC - X597
" lights up for
).
(or
on RC-406).
Default: XX
CHANNEL LOCK/
To unlock settings:
CH LOCK
1 Turn the volume knob to select a number.
2 Press 4 / ¢ to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code. (Initial pass code is
0000.)
4 Press the volume knob to confirm.
1 Turn the volume knob to select a number.
CODE SET
2 Press 4 / ¢ to move to the entry position.
3 Repeat steps 1 and 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings from next
time.
1 Turn the volume knob to select a category, then press the knob.
CHANNEL EDIT/
CH EDIT *
2 Turn the volume knob to select a channel you want to lock, then press the
knob. "L" appears in front of the channel number.
3 Press
to exit.
CHANNEL CLEAR/
YES: Clears all the locked channels. ; NO: Cancels.
CH CLEAR *
MATURE CH
ON: Turns on the Sirius XM-defined lock setting (mature channel). ;
OFF: Turns off.
• If [ON] is selected, your setting (CHANNEL EDIT/ CH EDIT) is temporary
ignored.
SIGNAL LEVEL/
NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current received
SIGNAL LVL
signal.
BUFFER USAGE/
0% — 100% (0): Shows the memory usage for Replay buffer.
BUF USAGE
* Displayed only when [MATURE CH] is set to [OFF].
SiriusXM™
Default: XX
ENGLISH |
9
Publicidad
