Publicidad
Idiomas disponibles
Idiomas disponibles
Model 9406 - SAVE THESE INSTRUCTIONS
The 9406 Warm Air Circulator combats mold and mildew by reducing the amount of
moisture available for spores to grow and multiply. This is accomplished using a unique
dual action that utilizes both a low wattage heating element and a fan to circulate air.
Operating Instructions
Simply plug the unit into any 110V/120V outlet. Make sure that airflow is not restricted.
The heater has been designed for continuous operation. Current draw is less than a
100 watt light bulb. NOTE: The key to keeping any area free of moisture is proper
ventilation. CAUTION! Surface is hot, avoid contact.
Care and Maintenance
The 9406 requires very little maintenance. By following the instructions within this
manual the heater will operate problem-free for years.
Unplug unit before cleaning. A vacuum can be used to clear the heater of any dust
build-up and a dry cloth may be used to wipe the surface.
Specifications
120 Volts, 60Hz, 90 Watts
Operation
An internal blower pulls cool, damp air in the bottom and releases warm dry air through
the top. Active air circulation technology raises the ambient temperature above the dew
point to control mold and mildew. Designed for low cost continuous use.
The amount of water vapour air can hold (absolute
humidity) increases with temperature. The 9406 low
wattage heating element slightly warms the room's air
to keep the moisture suspended rather than condensing
on surfaces where mold spores can use it to grow.
Secondly, the 9406 fan keeps a small amount of air
moving throughout the room to help evaporate any
moisture that is able to condense on surfaces to again
impede the growth of mold spores.
Publicidad
