Downloaded by: pm_clarallort on 13-07-2023 15:26 CEST
Release the cover of the chuck once you have
removed the accesory.
USE:
AS A SCREWDRIVER
Insert the accessory you need according to
previous instructions.
Select the direction you want to use with the
Forward / Reverse Selector (E).
To screw, set the direction to clockwise (CW).
To unscrew, set the direction to counter
clockwise (CCW).
The appliance should not be in use when
changing the screwing direction.
Select the torque needed using the torque
adjustment ring (B).
Set the torque setting in order to adjust the power
applied in the screws.
Turn the appliance on, by using the on/off switch
(D).
LED light (G) will assist you on your view and
power indicator lights (F) will lighten up showing
the actual level of the battery.
Perform the operation needed by pressing onto
the surface you desire to screw or unscrew the
screws needed.
90` ROTATION HANDLE
Press the button of rotation in order to release
the lock and turn the handle to anticlockwise so it
stays alligned with the screwdriving chuck.
To revers, proceed to do the backwards
operation.
LIGHT FUNCTION:
The appliance includes a light function, which
illuminates the working area under the appliance.
SAFETY LOCK:
The safety lock position stops the on switch from
activating; it prevents the appliance from being
switched on accidentally.
To activate this function, place the
Forward/Reverse selector in the middle position.
AS A FLASHLIGHT (H)
The screwdriver has an incorporated led
flashlight.
Press the flashlight on/off switch (J) to switch
on/off the flashlight.
ENGLISH
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Check the status of the battery. If battery is
discharged, connect it to the charger according to
the charging instructions.
Clean the appliance.
Store the appliance.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
A good way to clean and extend product life is to
shoot it with compressed air, to remove all
dirtiness in a dry way.
Never submerge the appliance in water or any
other liquid or place it under running water.
SUPPLIES
Supplies can be acquired from distributors and
authorised establishments for your appliance
model.
Always use original supplies, designed
specifically for your appliance model.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble or
repair the appliance yourself as this may be
dangerous.
If the connection to the mains has been
damaged, it must be replaced, take the appliance
to an authorised technical support service. Do not
attempt to disassemble or repair the appliance by
yourself in order to avoid a hazard.
SPECIFICATIONS:
⋅
Rated voltage:3.6V
⋅ Flashlight: 0.3W
⋅ No load speed: n
⋅ Battery capacity:1300mAh
⎓
:230/min
0