Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATIONS
• Keep children and other persons away from the working area.
• Do not allow children to play with this tool or its packaging.
• Do not use the tool if parts are missing or damaged.
• Use the tool for the intended purpose only.
• Always wear ANSI approved safety glasses when using this product.
• It is imperative that you observe the safety regulations of the manufacturer of your drive
machine.
• Disconnect the plug out of the socket or remove the battery before changing accessories.
• Only use accessories designed for this product.
• Do not change or modify this product under any circumstances.
• Always work in a clean, well-lit, tidy, and appropriately equipped area.
USE
1. Install the equipment into the chuck of the drill/driver as a bit or
into the chuck of the driving tool. You may need to adjust the
torque for different size thread nuts.
2. Choice the required pulling bolt and nose piece for the nut size.
3. Mount the threaded mandrel and the nosepiece to the rivet nut
attachment device.
4. Mount the rivet nut onto the threaded mandrel.
5. Set the drilling machine to the clockwise direction, make sure
the speed should not be too high.
6. For riveting, the device must be firmly pressed onto the
workpiece. When riveting, hold the drill and the rivet nut
attachment with both hands. Start the drilling machine to
clockwise direction until the riveting process is completed.
7. After the riveting process is finished, set the drilling machine to
slowly counterclockwise direction and remove the tie bolt from
the rivet nut.
MAINTENANCE AND CLEANING
Before cleaning or maintaining, first disconnect the plug from power mains and make sure the driving
tool cannot get started inadvertently.
Do not clean the rivet nut riveter with sharp detergents or aggressive chemicals.
DISPOSAL
Tool, accessories, and packaging should be sorted for environment-friendly recycling.
If your tool can no longer be used, then please keep in mind that many of its components
consist of valuable materials, which can be recycled. Please do not dispose it in the rubbish
bin, but check with your local council for recycling facilities in your area.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
