Publicidad
Idiomas disponibles
Idiomas disponibles
NOTES:
If freezer loses power for any reason, it will power - on automatically. You can expect it to
work properly in 3-5 minutes.
If you adjust temperature setting in freezer, allow several hours for the temperature to
stabilize between adjustments.
Refrigerator/Freezer Mode
This freezer has an advanced design feature that lets you change it from a freezer
to a refrigerator. You can switch from Freezer mode to Refrigerator mode only by
using the control panel.The Freezer / Fridge light on the control panel indicates
the current mode.
The Freezer / Fridge light on the control panel indicates the current mode.
• In Freezer mode, the FRZ./REF. icon will be illuminated.
• In Refrigerator mode, the FRZ./REF. icon will not be illuminated.
To change modes:
• Press
and hold for 3 seconds to unlock the control panel.
• Press
and hold for 3 seconds to change modes.
Error Codes
Code
Both Flashing
Both Flashing
Both Flashing
Tips on storing food
Freezer compartment
• The freezer is designated for the storage of food frozen at very low temperature,
long-term storage of frozen food, and for the production of ice.
• Only use the shelves in the door of the freezer to store frozen food, not for storing
hot food designated for freezing.
• Do not put fresh and frozen food next to each other. The frozen food may thaw.
• When freezing fresh food (such as meat, fish or chopped meat), cut them into parts
that can be used at the same time.
• Storing frozen food: instructions are usually stated on the packages, which must be
followed. If there is no information on the packaging, food should not be stored for
longer than three months from the date of purchase.
Meanings
Temperature
Temperature
sensor fault.
sensor failure.
Defrost sensor
Defrost sensor
fault.
Ambient
Ambient
temperature
temperature
sensor fault.
sensor failure.
09
Cause
Solution
Call for service.
Call for service.
failure.
Call for service.
EN
Publicidad
