Publicidad
Idiomas disponibles
Idiomas disponibles
2. (1). Press "
"
"button indicator light is on, and the kettle is under heat insulation
function, with red LED light shining. The indicator light is till shinning after
water is boiled and the kettle automatically turns into heat insulation
function in 2 hours, which will go on heating when water temperature
arrives at 85℃ till the 2 hours heat insulation time is completed.
(2). Press "
" for 2 seconds, with the buzzer sends out "di" sound, "
button indicator light is on, and the kettle is under heat insulation function.
Press "
"once, then the indicator light is under 60℃ condition with the
green LED light shining. This means that when water temperature arrives
at 50℃,it will boil to 60℃,and the heat insulation function works in 2 hours.
Press "
" twice, then the indicator light is under 70℃ condition with
the blue LED light shining. This means that when water temperature
arrives at 60℃,it will boil to 70℃,and the heat insulation function works in
2 hours.
Press "
" thrice, then the indicator light is under 80℃ condition with the
yellow LED light shining. This means that when water temperature arrives
at 70℃,it will boil to 80℃, and the heat insulation function works in
2 hours.
Press "
" the fourth time, then the indicator light is under 90℃ condition
with the purple LED light shining. This means that when water
temperature arrives at 80℃,it will boil to 90℃, and the heat insulation
function works in 2 hours. (Note: Only under such operation, will the kettle
be with heat insulation function. And this function will be invalid if the kettle
body is taken away from the base. Need to reset to start this function.)
3. Press "
" shortly, with the buzzer sends out "di"sound,the kettle is
under boiling water condition.
Press "
" once,then the indicator light is under 60℃ condition with green
LED light. This means that it will stop heating when the water temperature
is 60℃.
Press "
" twice,then the indicator light is under 70℃ condition with blue
LED light.This means that it will stop heating when the water temperature
is 70℃.
Press "
" thrice,then the indicator light is under 80℃ condition with
yellow LED light.This means that it will stop heating when the water
temperature is 80℃.
" for 2 seconds, with the buzzer sends out "di" sound,
"
Publicidad
