Publicidad
Idiomas disponibles
Idiomas disponibles
US
High-temperature warning (
If it appears on the screen, do not worry, the battery will restore automatically after cooling.
Low-temperature Warning (
If it is displayed on the screen, do not worry. It will automatically restore after the ambient
temperature is restored.
BASIC OPERATIONS
Output On/O
Main power on/o : Press the "Main Power Button" and the working indicator lights up and the LCD
display is illuminated. When this product does not have any operation for 2 minutes, the product will
enter the hibernation state and the display will turn o automatically. If you need to turn o the main
power, please press and hold the "Main Power Button" until the working indicator turns o . The default
standby time of this product is 2 hours. If the other power output switch is not turned on, and the
product does not have any load input, the product will automatically shut down after 2 hours. The
automatic shutdown time can be set on the Jackery App.
AC Output On/O : Ensure that the main power supply is turned on. Press the AC Button, the AC
Output operation indicator lights up. Then you can connect the equipment that needs AC charging.
Press the AC Button again to turn o the AC Output.
USB/Car Port Output On/O : Ensure that the main power supply is turned on. Press the DC Button,
the DC Output operation indicator lights up. Then USB/Car Port Output Ports can be connected to
external load devices. Press the DC Button again to turn o the USB/ Car Port Output.
LCD Screen On/O
To turn on, press the POWER Button or when there's a charging input, the screen display will light up
automatically. To turn o , press the POWER Button again and the screen display will turn o . Or, if
there is no operation in 2 minutes, the product will enter a sleep state and the screen display will
automatically turn o . To get the screen always-on (under charging or discharging state), follow these
steps: After the display screen lights up, double-click the POWER Button and the mode of Always-On
Display will be on. To turn o Always-On Display, follow these steps: Press the POWER Button and the
screen will be turned o in 2 minutes. Tip: During Always-On mode, the screen automatically turns o
after 2 hours without charging or discharging.
LED Light On/O
There are three modes of LED Light: Low Light mode, Bright Light mode, and SOS mode.
The operations are as follows: Ensure that the main power supply is turned on. Press the LED Light
Button, the LED will be turned on. The light will always turn on in Low Light mode and the output
power on the screen is 1W. Press again to enter the Bright Light mode and the output power on the
screen is 3W. Press the third time to enter the SOS mode and the output power on the screen is 3W.
Then, press again to turn o the LED Light. In any ofthese modes, the light can be turned o by a long
press.
App connection
This product supports the connection of Jackery App for intelligent control and operation. Users can
download the Jackery App through App Store or Android application markets. Please refer to the User
Manual for Jackery App for detailed connection instructions.
Reset WiFi & Reboot system
Press the POWER button and USB buttons at the same time for 3 seconds to reset the WiFi and restart
the system.
CHARGING YOUR JACKERY EXPLORER 700 PLUS
Green energy first: We advocate to use the green energy first. This product supports two modes of
charging at the same time: solar charging and AC wall charging.
When AC wall charging and solar charging are turned on at the same time, the product will give
priority to solar charging and both methods will be used to charge the battery at the maximum
permissible power.
04
) :
) :
Publicidad
