Descargar Imprimir esta página

Fellowes AutoMax 200C Manual Del Usuario página 3

Ocultar thumbs Ver también para AutoMax 200C:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
CAPABILITIES – SHRED THROUGH AUTO FEED TRAY
200C/150C
A4 paper
Staples
CAPABILITIES – SHRED THROUGH MANUAL FEED SLOT
200C/150C
Credit cards
CD/DVD
Will not shred:
Paper shred size:
Cross-Cut (200C/150C) .................................................................................
Micro-Cut (200M) .........................................................................................
BASIC SHREDDING OPERATION
200C
200M
Continuous operation:
Continuous operation:
NOTE: Shredder runs briefly
NOTE: Shredder runs briefly
after each pass to clear entry.
after each pass to clear entry.
Continuous operation beyond
Continuous operation beyond
25-minutes will trigger
20-minutes will trigger
25-minute cool down period.
25-minute cool down period.
LOADING INSTRUCTIONS
1
Paper clips
Pull apart stapled stacks
of paper containing more
than 20 sheets
Junk mail
Folded paper
150C
Continuous operation:
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
12-minutes will trigger
25-minute cool down period.
2
aligned with front of paper tray.
200M
A4 paper
Pull apart clipped stacks
of paper containing more
than 20 sheets
200M
Credit cards
Folded paper
Maximum:
Auto Feed Sheet Capacity (200C/200M) .................................................................... 200*
Auto Feed Sheet Capacity (150C) ............................................................................... 150*
Manual Feed Sheet Capacity (200C) ............................................................................. 10*
Manual Feed Sheet Capacity (200M) ...................................................
Manual Feed Sheet Capacity (150C) ...............................................................................
AUTO FEED
* Do not open lid once shred cycle has started.
1
2
Plug in and put
Open lid
disconnect power
switch in ON (I) position
MANUAL FEED
1
2
Plug in and put
Feed paper straight into
disconnect power
paper entry and release
switch in ON (I) position
Note: Manual feed cannot be used while Auto Feed in use. Shredder will not run when
lid is open.
3
If paper is not shredding through
of paper.
Staples
Pull apart stapled stacks
of paper containing more
than 20 sheets
4
3
Add paper. For detailed
Close lid and press start
(
) to begin shredding
reference section below.
3
or
paper entry and release
3

Publicidad

loading

Este manual también es adecuado para:

Automax 200mAutomax 150c