Publicidad
Idiomas disponibles
Idiomas disponibles
(1) Temperature unit: Hold
change the temperature unit. It will display the current symbol (℃/℉). To change
the unit, press
the setting and the current temperature will be displayed .
Voltage input:
(2)
Hold
the voltage input.
The input voltage, 12.26V will be displayed. The value will change, depending
on the battery situation.
(3)
/
: Hold the
(1) Enter the settings for the voltage protection gear. The current voltage protection
gear (H1, H2 and H3) will be displayed. The default setting is H2. Press
to adjust the settings. If nothing is pressed after six seconds, it will exit
the settings and the current temperature will be displayed .
Factory setting is H2.
Due to the voltage difference of the vehicle power output, if the red-light
flashes and the E1 code appears, the battery can be lowered (H3 to H2 or
H1).
The voltage parameters of high, medium and low third-gear are as follows:
12V off voltage (H1) 10.3V (H2) 10.8V (H3) 11.3V
Restart voltage (H1) 11.1V (H2) 11.8V (H3) 12.6V
24V off voltage (H1) 21.5V (H2) 22.3V (H3) 25.7V
Restart voltage (H1) 22.7V (H2) 23.7V (H3) 26.0V
(4) Press
twice to switch to ECO/HH mode. To enter ECO/HH mode, press
and
. If nothing is pressed after six seconds, it will exit
or
and
for 10 seconds at the same time to enter
and
" for approximately three seconds.
for 10 seconds at the same time to
or
Publicidad
