Publicidad
Idiomas disponibles
Idiomas disponibles
or
. Note: The default setting is HH (quick cooling mode).
The HH indicator is red. The ECO indicator is green.
(5) Indicator light: When the refrigerator and indicator is off, the red light will flash and the
HH/ECO mode will be on standby.
Figure. 1
（6）
Figure 1 DC12V socket
(7) Refrigerator floodlight：The light comes on when you open the refrigerator door，It will
turn off when the door is closed.
(8) Refrigerator fault code
EO
Temperature sensor is faulty or off.
F1
Voltage failure: Input voltage is outside the set range
F2
Fault with the fan current: The fan current end output is greater than 1A.
F3
A fault with starting the compressor.
F4
Compressor minimum speed failure
F5
Controller temperature failure
F6
Controller hardware failure
Five；Frequently Asked Questions
Refrigerator does not work.
◆Check if the power supply is faulty.
◆Check if the power plug is in good condition.
◆Fuse is blown.
◆Check if the power switch on the display panel is open.
When the cooling function is not working
◆Food storage quantity is too much.
◆The door is not closed.
◆The door seal is damaged and not tight.
Publicidad
