Introduction
The IDEAL 61-535 is a 120V AC Circuit Breaker Finder that automatically identifies
a circuit breaker/fuse protecting a live branch circuit. It consists of a transmitter and
a receiver. The Transmitter sends a signal over the conductors when connected to
an energized circuit. It also identifies the presence of power and indicates corrector/
incorrect wiring conditions via illuminated Green and Red LED's and contains
a GFCI Trip Tester. The receiver reads the transmitter's signal and identifies the
breaker/fuse energizing the circuit by illuminating a flashing green LED and
emitting beeps once it determines the breaker/fuse with the strongest signal.
The receiver also senses the presence of AC voltage (80 - 300 V AC) via and
non-contact voltage (NCV) sensor in the tip. The receiver indicates the presence of
AC voltage by illuminating a red flashing LED and emitting a beeping sound. The
audible tone for both the breaker finding mode and the NCV mode can be muted via
a button for working in noise sensitive areas. The receiver also includes a work light
that can be operated independently for work in poorly lit conditions.
Arc Flash and Shock Hazard, Proper PPE Required. Follow all safety procedures,
wear proper PPE in accordance to NFPA 70E. Read and fully understand the
instruction manual prior to using this product. Failure to comply can result in
serious injury or death.
Contacting IDEAL INDUSTRIES, INC.
To contact IDEAL INDUSTRIES, INC., call one of the following telephone numbers:
IDEAL Industries USA Customer Service
• Phone Number: 800-435-0705
• Email: contactus@idealindustries.com
IDEAL Industries Canada Customer Service
• Phone Number: 905-683-3400
• Email: ideal_Canada@idealindustries.com
IDEAL Industries EMEA
• Phone Number: +44 (0)1925 444 446
• Email: eur.sales@idealindustries.com
IDEAL Industries Australia
• Phone Number: +61 3 9562 0175
• Email: InfoAUS@idealindustries.com
Or visit the IDEAL Electrical Website at
www.idealind.com. To register your product,
find manuals, watch videos, simply scan this
QR code.
3