Cata B-10 Instrucciones De Uso página 14

Type: B-10 / B-12 / B-15
INSTALLATION:
This extractor fan must be installed at least 2,3 metres of the ground.
In order to carry out the installation make a 100 mm. (B-10), 120 mm. (B-12), 150 mm. (B-15) diameter circular
opening in the wall or ceiling where the extractor fan is to be installed.
Remove the front cover (A) by loosening the screw (1) until the cover comes free, then pull on it from the front.
Position the discharge tube (D) in the hole cut in the wall or ceiling for the extraction of air.
Fix the base (2) of the housing using the wall plugs and screws supplied by the manufacturer.
In order to carry out the electric connection, place de drill hole cover provided on the connecting cable. Then open
area (G) of cover (A), intended for the drill hole cover.
Connect the feeder cables to the connection (E), blue wire to N and brown wire to L.
Note:
- This extractor is not designed to be used by people (including children) with physical, sensorial or mental
capacity, or who lack experience or knowledge about it, unless they have had supervision or instructions on how
to use the hood by someone who is responsible for their safety.
- Children must be supervised to ensure that they do not play with the extractor.
- The installation, electrical connections and adjustments must be performed according to the local rules by
a qualified person.
– Do not install the discharge tube (D) of the extractor fan to a chimmey with smoke, ventilation pipes or hot
air flues.
Before carryling out the installation to tubing, consult municipal regulations regarding air outlets and request
permission from the person responsible for the building.
– Ensure that there is appropriate ventilation, in particular when the extractor fan is used simultaneously with
a combustion chamber device in the same room.
– This extractor fan is intended for domestic or similar ventilation.
– This extractor fan has a mixed flow centrifuge for installation to tubing or wall with direct expulsion of air.
– Do not use in areas with a room temperature of above 40° C.
– This extractor does not cause any interference in radio/television sets (Standard 2004/108/CE).
EN
IPX4
ENGLISH