SongBook supports USB PD Fast charging via the USB-C Charge Port. The power delivered by the charger must be
between min 5 Watts required by the Songbook, and max 30 Watts in order to achieve the maximum charging speed.
For fastest charging, use a USB-C PD Charger capable of delivering 15V 1.5A.
LED Indicator:
•
Red (Blinking): SongBook is charging.
•
Green (Blinking): SongBook charging complete.
Standby Mode
If your SongBook MAX is powered on and idle, it will automatically enter standby mode.
Normal Standby: In AUX IN mode, the SongBook MAX will enter normal standby after 15 minutes of no audio. To wake
the speaker, toggle the Power switch off then back on. Power consumption in Normal Standby mode is less than 0.8W.
Network Standby: In BT mode, the SongBook MAX will enter network standby after 15 minutes of no audio. To wake the
speaker, single press the Source knob or toggle the Power switch off then back on. Power consumption in Network
Standby mode is less than 2W.
Single press the Source knob to enter settings menu. Rotate the source knob left or right to scroll through the menu
options. Single press the source knob to confirm.
System
Single press the Source knob to enter the <System> menu.
Contrast
Rotate the source knob until <Contrast> appears onscreen. Single press the Source knob. Turn the source knob
until the desired contrast is achieved.
Auto Standby
Rotate the source knob until <Auto Standby> appears onscreen. Single press the Source knob. Rotate the source
knob to Enable or Disable the Auto Standby function. Single press the Source knob to confirm.
Software Version
Rotate the source knob until <Software Version> appears onscreen. Single press the Source knob to view the
current software version.
Factory Reset
Rotate the source knob until <Factory Reset> appears onscreen. Single press the Source knob. Turn the source
knob until the confirmation appears, then press the source knob to confirm. A Factory Reset will restore all
features on the SongBook MAX to their default settings.
Preset
In FM or DAB source, rotate the source knob until <Preset> appears onscreen. Single Press the Source knob. Rotate the
source knob to view currently stored presets.
Scan Setting
In FM or DAB source, turn the source knob until <Scan Setting> appears onscreen. Single press the source knob. Turn
the source knob to select the desired scan strength. Singe press to confirm.
English
Settings
8