Samsung SNC-300 Manual De Usuario página 25

SEARChING FOR ThE CAmERA
IP Installer screen layout
1
device Name : Model name of the connected device.
1
Mode : Shows the current selection between <Static>and <Dynamic>.
2
mac Address : The Mac address of the network interface of the camera that is printed
3
on the rear panel.
IP Address : The IP address of the camera. (Default setting is '192.168.1.200'.)
4
UPnP Status : This is unavailable for this camera.
5
URl : This is DDNS address that can be used to connect from an external Internet.
6
However, if the DDNS update fails, it will be displayed as an IP address of the
camera.
Search Button : Searches for the camera connected to the current network.
7
Auto Set Button : Sets up the camera network settings automatically using the
8
manual Set Button : Allows the user to set up the camera network settings manually.
9
Exit Button : Exits the IP Installer program.
10
On Windows Vista, the settings should be configured by the Administrator to use the IP installer
normally.
2 3
<IP Installer>.
4 5
7 8
Network Connection & Setup
6
9 10
_21