Publicidad
Idiomas disponibles
Idiomas disponibles
USE
• Place the button on desired position to start the
heater.
• Place the button to O position to turn off the heater.
A thermal safety device automatically
cuts the heating element in the event of
overheating. In this case, the fan continues
to run to cool the device, and the appliance
can re-start as soon as the normal
conditions and temperature needed for it to
function are re-established.
Adjust the thermostat :
Choose Heating Power
(1000W) or
(2000W).
CARE
• Use a soft, dry cloth.
• For persistent stains, use a cloth dampened with soapy water and wipe immediately with a dry cloth.
TROUBLESHOOTING
Malfunctions are often due to minor causes; please read the table below before contacting the after-sales service.
This can save you time and avoid unnecessary expenses.
Problem
The device does not turn
on.
The unit does not heat.
Place button on max
temperature.
Causes, Solutions
Check that the device is electrically powered. Check that the switch is not in position mini.
Check the temperature of the room: if it is too high compare to the thermostat setting, the unit
does not heat.
Fan with low Heater
Fan without Heater
40
40
40
40
40
40
30
30
30
30
30
30
20
20
20
20
20
20
10
10
10
10
10
10
0
0
0
0
0
0
-10
-10
-10
-10
-10
-10
Wait until the
Turn slowly the button
desired room
until the appliance
temperature is
switches off (the
reached.
heating indicator goes
out)
53
Heating
indicator
Fan with high Heater
Off
40
40
30
30
20
20
10
10
0
0
-10
-10
The appliance will heat
as soon as the room
temperature drops
to maintain this set
temperature.
EN
Adjust the
thermostat
40
40
30
30
20
20
10
10
0
0
-10
-10
Publicidad
