Exo Terra REPTI FLO 200 Manual De Instrucciones página 3

CIRCULATION PUMP
Instruction Manual
• Multi-Purpose, Submersible Pump for
Aqua-terrariums and Paludariums
• For Indoor and Submersible Use Only
Read instructions thoroughly prior to installation and operation.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: T o guard a gainst injur y , basic precautions should be
observed when handling the pump, including the follo wing.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
and all important notices on the a
to do so may result in dama ge to unit.
2. DANGER - T o avoid possible electric shock, special care should
be taken since wa ter is emplo yed in the use of this equipment.
This a ppliance has no user ser viceable parts. Do not a t tempt
repairs yourself; return the a ppliance to an authorized ser vice
facility for ser v ice or discard the a p pliance.
A. For INDOOR, FRESHW A TER use only .
B. Carefully examine the a ppliance after installa tion. It should not
be plugged in if there is wa ter on parts not intended to be wet.
C. If the pump sho w s any sign of abnormal wa ter leakage,
immedia t ely unplug it from the po wer source.
D. Do not opera te any appliance if it has a dama ged cord or plug,
or if it is malfunctioning or if it is dropped or dama
manner . The po wer cord of this a p pliance cannot be replaced; if
the cord is dama g ed, the appliance should be discarded. Never
cut the cord.
E. T o avoid the possibility of the a ppliance plug or electrical
socket getting wet, position the unit to one side of a wall
mounted socket to prevent wa ter from dripping onto the socket
or plug. A "drip-loop" should be arranged. The "driploop" is that
prevent wa ter from tra v eling along the cord and coming into
contact with the socket. If the plug or socket does get wet, DO
NOT unplug the cord. Disconnect the fuse or circuit breaker tha
supplies po wer to the a ppliance. Then unplug and examine for
the presence of wa ter in the socket.
3. It is suggested tha t this appliance and an y other submersed
ppliance before using. Failure
ged in an y
part of the
cord belo w
the level of
the socket,
or the
connector
if an
extension
cord is
used, to
t