Publicidad
Idiomas disponibles
Idiomas disponibles
User's Manual
INSTALLATION INSTRUCTIONS
1. Before installation, check that the outlet box is securely installed in place and it is able to support at least the fan weight. Securely
attach the mount bracket to ceiling outlet box acceptable for ceiling fan support.
Leveled Ceiling Mounting
Attention
Install the ceiling fan in a location such that the spacing from the tip of the blades to the nearest objects or walls is AT
LEAST 12" (300mm). If the ceiling is angled, the fan mounting equipment is only designed for a maximum 11 degree
incline or decline.
Industrial DC Ceiling Fan
To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box
before hanging. (Figure 1)
NOTE: If you are not sure if the outlet box is grounded, contact
a licensed electrician for advice, as it must be grounded for
safe operation.
The fan must be hung with at least 10´
of clearance from floor to blades. (Figure 2)
The outlet box must be securely anchored and capable
of withstanding a load of at least 35 lbs. Hanger bracket
must seat firmly against outlet box.
If the outlet box is recessed, remove wallboard until
bracket contacts box. If bracket and/or outlet box are
not securely attached, the fan could wobble or fall.
The fan be mounted to an outlet box and that the
mounting screws provided with the outlet box shall be
used.
To Reduce The Risk Of Fire, Electric Shock, Or
Personal Injury, Mount To Outlet Box Marked
" Acceptable for Fan Support of 15.9 kg (35 lbs) or
less" And Use Mounting Screws Provided With The
To Reduce The Risk Of Electric Shock, This Fan Must
Be Installed With An Isolating Wall Control Switch.
Angled Ceiling Mounting
5
Outlet Box.
Publicidad
