Publicidad
Idiomas disponibles
Idiomas disponibles
6. Remove the two screws from the mount bracket. Assemble the canopy by tighten the screws. Securely attach and tighten the
canopy cover.
7. Install the fan blade cap to the fan blade with (H9) M4x6mm
long screw and (H10) Ф4 plain washer. Repeat this step for all 9
fan blades.
8. Install the fan blade screw cover to the fan blade with (H12)
M5x8mm long screw and (H11) Ф5 lock washer. Repeat this
step for all 9 fan blades.
Industrial DC Ceiling Fan
8
User's Manual
Rotate canopy until lock
pin of mounting bracket is
engaged with canopy,
then tighten the screws
till the keyhole is locked.
Publicidad
