Hisense RB390N4BC20 Manual De Instrucciones página 50

19
Display controls
Display panel on door
Display panel on door
Controlling the temperature
We recommend that when you start your
refrigerator for the first time, the
temperature for the refrigerator is set to
4°C. If you want to change the
temperature, follow the instructions
below.
Caution!
When you set a temperature, you set an
average temperature for the whole
refrigerator cabinet. Temperatures inside
each compartment may vary from the
temperature values displayed on the
panel, depending on how much food you
store and where you place them.Ambient
temperature may also affect the actual
temperature inside the appliance.
Fridge
Press "ZONE CHOICE", the " "light
●
will turn on. Then press "SET TEMP.", you
can set fridge temperature between 2°C
and 8°C as needed, and display panel will
display corresponding values according
to the following sequence.
8
Freezer
Press "ZONE CHOICE", when the "
light turns on. Then press "SET TEMP.",
you can set freezer temperature between
-14°C and -24°C as needed, and the
display panel will display corresponding
value according to the following
sequence.
-18°C -19°C -20°C
-17°C -16°C -15°C
Super Freeze( )
Super Freeze will quickly lower the
temperature within the freezer so food will
freeze faster. This can lock in the vitamins
and nutrients of fresh food and keep food
fresh longer.
You can press "SUPER" to get into
●
super freezer mode.
Whensuper freeze Mode is selected,
●
the light will be illuminated and the freezer
temperature will be set at -24°C.
In case of the maximum amount of food
●
to be frozen, please wait about 24 h.
Super freeze automatically switches off
●
after 52 hours and then the freezer
temperature setting will revert back to the
previous setting.
Eco energy
This function makes the freezer work in a
power saving mode which is useful for
reducing energy consumption when you
are away.
You can press "ECO MODE" to get into
●
economic energy mode.
When economic energy Mode is
●
"
-22°C -23°C
-21°C
-14°C -24°C