Publicidad
Idiomas disponibles
Idiomas disponibles
EXPLODED VIEW
Part
1
Remote Control
2
Flame Circuit Board
3
Flame Generator/ Spinner
4
Flame Generator Drive Motor
Wood Cabinet
5
6
Thermostat Sensor
7
Heater/Blower Assembly
8
Control Panel Circuit Board
9
Front Panel with Frame
10
Emberbed with Log
11
Main Circuit Board
CARE AND MAINTENANCE
• The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no
further lubrication. However, we recommend periodic cleaning/vacuuming of the fan/heater.
• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products
can be obtained at supermarkets or hardware stores.
• Make sure the unit is turned OFF and unplugged before cleaning the heater or fireplace.
A581
Part Name
7
Part Number
P138
N/A
N/A
N/A
N/A
INS-NTC
N/A
N/A
N/A
N/A
N/A
www.tsicustomerservice.com
Publicidad
