Chauvet Professional REM-RB100CM IP Guía De Referencia Rápida página 2

EN
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the REM-RB100CM IP.
• ALWAYS:
• Take environmental aspects into account when using outdoors. The performance or structural integrity of
LED video panels and rigging hardware may be affected by sunlight, rain, or especially, wind.
• Consult with a professional structural engineer for any Temporary Demountable Structure (temporary
indoor or outdoor stage) designs to ensure this product can be used safely in each application.
• DO NOT:
• Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
• Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not
limited to:
• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
• Locations that are prone to flooding or being buried in snow.
• Other areas where the product will be subject to extreme radiation or caustic substances.
• In the event of a serious operating problem, stop using immediately.
What is Included
• REM-RB100CM IP
• 2x Clamp attachment brackets (DRB-CTC)
• 2x Clamp bolts for TRUSST CTC-50HC
• Quick Reference Guide
Mounting
Before mounting this product, read the
weight of the products.
Mounting Diagram
Alignment
conical (x4)
1
QUICK REFERENCE GUIDE
Safety Notes. Make sure the mounting hardware is capable of supporting the
Latch (x5) Receiver (x3)
(For use with
Ground Support 2 Kit)
Rig Bar Latch
Tightening
knob
REM-RB100CM IP QRG Rev. 3
Spring
knob
Locking
bar